NovaStar H_STD I/O card

This card can be installed into the input card slots.

Key Features

• 2x COM
  • Programmable RS422/RS485/RS232 ports that are used to control the devices that adopt RS422/RS485/RS232 protocol
  • COM port pins are shown as below:
  • 
  • Pin wirings are shown as below:
  • 
• 1x ETHERNET
  • Control the device connected to this card.
  • 10/100Mbps self-adaptive
  • TCP/IP protocol and UDP/IP protocol supported
• 3x I/O
  • Trigger the execution of the function requirements via programming.
  • Input and output modes supported
  • Pins 1, 2 and 3 can be set to either the input or output, and pin G is the common grounding pin for pins 1, 2 and 3.
• 3x RELAY OUT
  • Connect to the relay to control the power on and off the connected device.
  • Voltage: 30 VDC, current: 3A at maximum
  • Six pins are divided into three groups, which can be connected or disconnected via programming.
• 3x IR OUT
  • Programmable infrared control supported
  • Pins 1, 2 and 3 are used for infrared emission, and pin G is the common grounding pin for pins 1, 2 and 3.
• Specifications:
  • Weight: 400 g
  • Dimensions: 193 mm × 247.12 mm × 21.15 mm
  • Power consumption: 1.2 W

Downloads

• H_STD I/O card Specification